Skip to content
StrongFirewall

Documentation

Installation guide

Cloud (qcow2), physical server or VM (ISO)

1. Cloud: qcow2 image

  1. Upload strongfw-1.0-cloud.qcow2 to your provider (OpenStack: openstack image create --disk-format qcow2 --file strongfw-1.0-cloud.qcow2 strongfirewall).
  2. Create the instance with 2 vCPU, 2 GB RAM and a 16 GB disk or larger, plus your SSH key.
  3. In the security group, allow TCP 443 (portal), 22 (SSH) and, if used, the SSL VPN port.
  4. Open https://<IP>/portal/. The initial certificate is self-signed: check it and accept it.

2. Physical server or VM: ISO

In the boot menu:

OptionWhat it does
StrongFirewall (live)Runs the firewall from the media. Nothing is written to disk; the configuration is lost on reboot.
… load everything into memoryCopies the system to RAM; the media can be removed after boot.
… safe modeWithout kernel mode setting, for troublesome graphics cards.

To install, open the live console and run:

sudo strongfw-install

The installer lists the disks, asks you to type APAGAR (erase), writes the image, grows the partition to the end of the disk and sets the system up for local use (no cloud metadata). Unattended: sudo strongfw-install --disk /dev/sda --yes.

3. First login

4. Next steps

  1. In Network › Interfaces, assign each interface to a zone (trust, untrust, dmz).
  2. Create the security policies and outbound NAT.
  3. Click Commit: the portal shows what will be applied and keeps a revision you can roll back to.